DRAWING OIL WITCOL DRAW OIL- 150/220

SPECIAL FEATURES

Witcol Draw Oil is excellent on stainless steel and ferrous metals. It is used for drawing, forming, stamping, and punching on medium to heavy jobs. It is ideal for many punching applications. With EP and lubricity additives, many parts can go through secondary operations without reapplying the lubricant. Recommended for materials starting at 0.040 inches thick to plate.

PERFORMANCE BENEFITS

Low wear on mandrel and dies
Reduction in frictional heat
Applied close limit on wall thickness

TECHNICAL SPECIFICATION

PROPERTIES	ASTM METHOD	150	220
Appearance	Visual	Clear Liquid	Clear Liquid
Colour	Visual	Light Yellow	Light Yellow
Viscosity @ 40°C (Cst)	ASTM D – 445	160 ± 10	220 ± 20
Viscosity @ 100°C (Cst)	ASTM D – 445	16 ± 3	21 ± 5
Density	ASTM D – 1298	0.90 ± 0.1	0.90 ± 0.1
Flash Point° C	ASTM D – 97	250	250
Pour Point °C	ASTM D – 92	- 5	- 5
Viscosity Index	ASTM D - 2270	100	100

DISCLAIMER

The information given here is considered to be correct and offered for your consideration, investigation, and verification. Please be advised that no warranties are expressed or implied due to the inherent variability in product use, which is beyond our direct control.