DRAWING OIL WITCOL DRAW OIL- 150/220

Witcol Draw Oil is a straight oil. It is a medium viscosity material formulated with mineral oil, lubricity agents, and chlorinated EP additives.


Witcol Draw Oil is excellent on stainless steel and ferrous metals. It is used for drawing, forming, stamping, and punching on medium to heavy jobs. It is ideal for many punching applications. With EP and lubricity additives, many parts can go through secondary operations without reapplying the lubricant. Recommended for materials starting at 0.040 inches thick to plate.

PERFORMANCE BENEFITS

  • Low wear on mandrel and dies

  • Reduction in frictional heat

  • Applied close limit on wall thickness

Properties ASTM Method 150 220
Appearance Visual Clear Liquid Clear Liquid
Colour Visual Light Yellow Light Yellow
Viscosity @ 40°C (Cst) ASTM D – 445 160 ± 10 220 ± 20
Viscosity @ 100°C (Cst) ASTM D – 445 16 ± 3 21 ± 5
Density ASTM D – 1298 0.90 ± 0.1 0.90 ± 0.1
Flash Point° C ASTM D – 97 250 250
Pour Point °C ASTM D – 92 - 5 - 5
Viscosity Index ASTM D - 2270 100 100

DISCLAIMER
The information given here is considered to be correct and offered for your consideration, investigation, and verification. Please be advised that no warranties are expressed or implied due to the inherent variability in product use, which is beyond our direct control.