WITCOAT FAST DRYING BLACK VARNISH

STORAGE

As a finishing coat for exterior and interior surface, modified alkyd systems is used for corrosive marine and industrial environment. Suitable for protection of pipes & structural steel in chemical and fertilizer plants, dock installation, thermal power plants etc.

APPLICATION DETAILS

Application Method: Air spray/brush
Recommended Thinner: Witcoat Q.D. Thinner
Film Thickness: Dry: 20-25 microns (by dft meter)

SURFACE PREPARATION

Remove oil grease with suitable detergent solution and other contaminants by high pressure fresh water hosing. Dust off the residue.

APPLICATION CONDITIONS

Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

SAFETY

As a general rule, inhalation of solvent vapour or paint mist and eye and skin contact with the liquid paint should be avoided. Forced ventilation should be provided when working with solvent borne coatings in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin, and eye protection are always recommended when spraying. In addition, national and local safety regulations should be followed.

The product is recommended to be used as a finishing coat for exterior and interior surfaces. Modified alkyd and pigment based systems are used in corrosive marine and industrial environments. It is also suitable for protection of pipes and structural steel in chemical and fertilizer plants, dock installations, thermal power plants, etc.

TECHNICAL SPECIFICATION

PARAMETERS	AROMATIC OILS
PROPERTIES	SPECIFICATION	NOTE
Finish	Smooth & Glossy	-
Application Viscosity @ 300C	11-15 Sec	By B-4 Ford Cup
Shade	Black	-
Volume Solid %	20 %	-
Theoretical Spreading	8-10	M2/Ltr@ 20-25 Microns Dft
Flash Point	Above 25 0C	Abel Closed Cup
Dry to touch	4-6 Minutes.	At 30°c
Hard Dry	3-4 Hrs	At 30°c
Shelf Life	6 Months	Months at 30°c

DISCLAIMER

The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for any loss or damage caused, including liability for negligence, that may be suffered by the user of the data contained herein. It is the user’s responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. Please be advised that no warranties are expressed or implied due to the inherent variability in product use, which is beyond our direct control.