SPIN FINISH (POY) WITCOL SPIN FINISH D – 93 EHLM

Witcol D - 93 EHLM is a combination of lubricants and surfactants that facilitates the processing of Polyester POY and enhances the subsequent False Twist Draw texturing process.


Description

NB

The product must be stored at 25°C . Please ensure that while preparing the emulsion, Spin Finish is crystal clear and the temperature is more than 25°C.

DISCLAIMER

The provided information is presented for your careful consideration, investigation, and verification. Please be advised that no warranties are expressed or implied due to the inherent variability in product use, which is beyond our direct control.

  • Imparts low fibre-metal dynamic friction and high filament cohesion

  • Good package buildup with no overthrown ends or loops

  • Good antistatic properties

  • Excellent compatibility with polyurethane discs

  • Stable thermal characteristics with low fuming tendency

  • Non-corrosive and gentle on the skin

  • Non-yellowing characteristics

  • Water-soluble residues that can be easily cleaned with godets

Properties Unit Astm methods Specification
Appearance Attribute Visual Clear Liquid
Colour (Gardner No.) Number ASTM D - 1544 Max. 4
Viscosity @ 40° (Cst) CST ASTM D - 445 100 ± 15
10% Emulsion Attribute Visual Transparent
pH of 10% Emulsion Number ASTM D - 664 7.5 ± 0.5
Acid Value mg. KOH / gm. ASTM D - 974 Max. 6.0
Density @ 30° gm. / cc ASTM D – 1298 1.05 ± 0.05
Active Content ( %) % ASTM D – 4377 90 ± 2
Pour Point °C ASTM D - 97 Max. 10

NB

The product must be stored at 25°C . Please ensure that while preparing the emulsion, Spin Finish is crystal clear and the temperature is more than 25°C.

DISCLAIMER

The provided information is presented for your careful consideration, investigation, and verification. Please be advised that no warranties are expressed or implied due to the inherent variability in product use, which is beyond our direct control.