SPIN FINISH - FOR NYLON POY

Our huge array of Nylon POY is formulated using high quality additives. It utilizes the latest composition in accordance with various international quality standards. Owing to its salient properties like accurate composition and longer shelf life, our Spin Finish Nylon POY is highly demanded in the national and international markets.


Description

EMULSION CONCENTRATION

8-10% in DM Water

OIL APPLICATION

Normal Denier 0.35 - 0.40%
Micro Denier 0.48 - 0.55 %
Dope Dyed 0.48 - 0.58 %

SHELF LIFE

12 Months

EMULSION PREPARATION

For preparing the spin finish solution, only DM water should be used. DM water conductivity should be 0.5 µS/cm and free from silicic acid. For the protection of bacteria, we recommend adding bactericide to the water and stirring for 10 minutes. Pour Witcol Spin Finish into DM water with continuous stirring until it is fully emulsified.

STORAGE CONDITION

Protect From heat and frost.

PACKING

200 kgs in Plastic Drums or 1 Mt in Plastic containers.

  • Imparts low fibre-metal dynamic friction and high filament cohesion

  • Good package buildup with no overthrown ends or loops

  • Good antistatic properties

  • Excellent compatibility with polyurethane discs

  • Stable thermal characteristics with low fuming tendency

  • Non-corrosive and gentle on the skin

  • Non-yellowing characteristics

  • Less tension during texturising

  • Higher spin finish retention

  • Excellent moistening for homogeneous film formation

  • Water-soluble residues that can be easily cleaned with godets

Properties Test Method Witcol Spin Finish-POY
Appearance Attribute Visual
Colour (Gardner No.) Number ASTM D - 1544
Viscosity @ 40° (Cst) CST ASTM D - 445
Density @ 30°C gm / cc ASTM D – 1298
Appearance Of 10% Emulsion Attribute Visual
Active Content % ASTM D – 4377
Pour Point °C ASTM D - 97

EMULSION CONCENTRATION

8-10% in DM Water

OIL APPLICATION

Normal Denier 0.35 - 0.40%
Micro Denier 0.48 - 0.55 %
Dope Dyed 0.48 - 0.58 %

SHELF LIFE

12 Months

EMULSION PREPARATION

For preparing the spin finish solution, only DM water should be used. DM water conductivity should be 0.5 µS/cm and free from silicic acid. For the protection of bacteria, we recommend adding bactericide to the water and stirring for 10 minutes. Pour Witcol Spin Finish into DM water with continuous stirring until it is fully emulsified.

STORAGE CONDITION

Protect From heat and frost.

PACKING

200 kgs in Plastic Drums or 1 Mt in Plastic containers.