WITCOAT FAST DRYING BLACK VARNISH

Witcoat Fast Drying Black Varnish is a modified alkyd based coating resistant to salt water, acids, alkalis, and a wide range of chemicals. This is free from lead, chromate, chlorine, and heavy metals.


WITCOAT FAST DRYING CLEAR VARNISH

Witcoat Fast Drying Clear Varnish is a modified alkyd based coating resistant to salt water, acids, alkalis, and a wide range of chemicals. This is free from lead, chromate, chlorine, and heavy metals.



The product is recommended to be used as a finishing coat for exterior and interior surfaces. Modified alkyd and pigment based systems are used in corrosive marine and industrial environments. It is also suitable for protection of pipes and structural steel in chemical and fertilizer plants, dock installations, thermal power plants, etc.

As a finishing coat for exterior and interior surface, modified alkyd systems is used for corrosive marine and industrial environment. Suitable for protection of pipes & structural steel in chemical and fertilizer plants, dock installation, thermal power plants etc.

APPLICATION DETAILS
Application Method: Air spray/brush
Recommended Thinner: Witcoat Q.D. Thinner
Film Thickness: Dry: 20-25 microns (by dft meter)


SURFACE PREPARATION
Remove oil grease with suitable detergent solution and other contaminants by high pressure fresh water hosing. Dust off the residue

APPLICATION CONDITIONS
Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

SAFETY
As a general rule, inhalation of solvent vapour or paint mist and eye and skin contact with the liquid paint should be avoided. Forced ventilation should be provided when working with solvent borne coatings in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin, and eye protection are always recommended when spraying. In addition, national and local safety regulations should be followed.

PARAMETERS AROMATIC OILS
PROPERTIES SPECIFICATION NOTE
Finish Smooth & Glossy -
Application Viscosity @ 300C 11-15 Sec By B-4 Ford Cup
Shade Black -
Volume Solid % 20 % -
Theoretical Spreading 8-10 M2/Ltr@ 20-25 Microns Dft
Flash Point Above 25 0C Abel Closed Cup
Dry to touch 4-6 Minutes. At 30°c
Hard Dry 3-4 Hrs At 30°c
Shelf Life 6 Months Months at 30°c

DISCLAIMER
The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for any loss or damage caused, including liability for negligence, that may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. Please be advised that no warranties are expressed or implied due to the inherent variability in product use, which is beyond our direct control.