Witcoat Q.D. Anticorrosive Black Paint is a modified alkyd based coating resistant to salt water, acids, alkalis and a wide range of chemicals. This is free from lead, chromate, chlorine & heavy metals.

The product is recommended to be used as a finishing coat for exterior and interior surfaces. Modified alkyd and pigment based systems are used in corrosive marine and industrial environments. It is also suitable for protection of pipes and structural steel in chemical and fertilizer plants, dock installations, thermal power plants, etc.

Application method: Air spray/brush
Recommended thinner: Witcoat Q.D. Thinner
Film thickness (dry): 35-45 microns (by dft meter)

Remove oil grease with suitable detergent solution and other contaminants by high pressure fresh water hosing. Dust off the residue.

Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

As a general rule, inhalation of solvent vapour or paint mist and eye and skin contact with the liquid paint should be avoided. Forced ventilation should be provided when working with solvent borne coatings in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin, and eye protection are always recommended when spraying. In addition, national and local safety regulations should be followed.
Finish Smooth & Semi Glossy To Glossy -
Application Viscosity @ 30°C 25-35 Sec By B-4 Ford Cup
Shade According to the requirement of the party Visually
Volume Solid % 32 % -
Theoretical Spreading 9-10 M2/Ltr @ 30-35 Microns Dry Film Thickness
Flash Point Above 25°C Abel Closed Cup
Drying Time @ 30°C Tack Free Hard Dry 15-20 Minutes. 2-3 Hrs. Excellent
Shelf Life 6 Months Months at 30°C

The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for any loss or damage caused, including liability for negligence, that may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. Please be advised that no warranties are expressed or implied due to the inherent variability in product use, which is beyond our direct control.