Witcol Cutwell – 6000

Water Soluble Synthetic Cutting Oil :

Witcol Cutwell - 6000 is concentrated, water-soluble oil Compounded for ferrous and non-ferrous materials.

Witcol Cutwell - 6000 is blended from the finest quality of Synthetic Esters available. Incorporated into these Esters are extreme pressure additives, and emulsifier and germicidal agents.

It is a heavy duty, soluble oil with high EP properties. An emulsion of Water Soluble Cutting Oil combines the cooling characteristics of a conventional emulsion with the load carrying properties of cutting oil. Thus, a product of this type can be used on machining operations where the extreme pressure requirements are too severe for conventional soluble oils.

It is generally recommended for heavy duty machining of carbon steels, stainless steels, and high temperature alloys, on automatic lathe, drilling, milling and boring operations.

It can also be used in applications such as gear hobbing, gear shaping and broaching of ferrous metals.

TECHNICAL SPECIFICATION :

  Properties   Units   Test methods   Value
  Appearance   Attribute   Visual   Clear Liquid
  Density at 30°C   Number   ASTM D – 1298   0.95 ± 0.05
  Viscosity 40°C CST   CST   ASTM D – 445   80.0  ± 20.0 CST
  Viscosity Index   Number   ASTM D – 2270   Min 100
  % Sulfur   Number   ASTM D – 4294   Nil
  Cast iron corrosion test   Attribute   ASTM D – 4627   Passes
  5 % Emulsion in H.W.   Attribute   Visual   Translucent
  5 % pH   Number   ASTM D – 664   9.50 ± 0.5*

*5% by volume soluble oil concentrate in 95% distilled water.

DISCLAIMER :
The information given here is considered to be correct and offered for your consideration, investigation and verification. No warranties are expressed or implied since the use of products is beyond our control.