SPIN FINISH ( POLYESTER FDY ) WITCOL SPIN FINISH FDY - 50 PE

DESCRIPTION :
WITCOL FDY – 50 PE is a combination of lubricants, surfactants and antistatic agents with various additives to facilitate the FDY process and enhance performance during knitting (Warp & Circular) Twisting and Weaving process.

SPECIAL FEATURES :

• Imparting Low fibre-metal dynamic friction and high filament cohesion to have good package build up and avoid overthrown ends or loops
• Good Antistatic properties and Good sizing ability
• Stable thermal characteristics with low fuming tendency
• Ensures Non Corrosive properties and non irritating to the skin
• Excellent wetting and penetration resulting uniform application
• Non yellowing characteristics
• Residues are water soluble and can be easily cleaned from the Godets

TECHNICAL SPECIFICATION :

\
  Properties   Unit   Description   Specifications
  Appearance   Attribute   Visual   Clear Liquid
  Colour (Gardner No.)   Number   ASTM D - 1544   Max. 4.0
  Viscosity @ 40° (Cst)   CST   ASTM D - 445   50 ± 5
  Density @ 30°C   gm / cc   ASTM D – 1298   0.935 ± 0.05
  Appearance Of 10% Emulsion   Attribute   Visual   Translucent
  pH Of 10% Emulsion   Number   ASTM D - 664   7.5 ± 0.5
  Active Content   %   ASTM D – 4377   90 ± 2
  Pour Point   °C   ASTM D - 97   Max. 10°C

NB : Product must be stored at >25 ° C . Please ensure that while preparing emulsion, Spin Finish is crystal clear and temperature is more than 25  C.

DISCLAIMER:
The information given here is considered to be correct and offered for your consideration, investigation and verification. No warranties are expressed or implied since the use of products are beyond our control.