DRAWING OIL WITCOL DRAW OIL – 150 / 220

Introduction :

‘Witcol Draw Oil is straight oil. It is a medium viscosity material formulated with mineral oil, lubricity agents, and chlorinated EP additives.

Application :

Witcol Draw Oil is excellent on stainless steel and ferrous metals. Use for drawing, forming, stamping and punching on the medium to heavy jobs. Ideal for many punching applications. Because of its EP additives and lubricity additives, many parts can go through many secondary operations without reapplying the lubricant. Recommended for materials from .040 inches thick to plate.

Performance Benefits :

• Excellent on stainless steel and ferrous metals
• Drawing, forming, stamping and punching
• Low wear on mandrel and dies
• Reduction in frictional heat
• Close limit on wall thickness

TECHNICAL SPECIFICATION :

  Properties   ASTM Methods   150   220
  Appearance   Visual   Clear Liquid   Clear Liquid
  Colour   Visual   Light Yellow   Light Yellow
  Viscosity @ 40°C (Cst)   ASTM D – 445   160 ± 10   220 ± 20
  Viscosity @ 100°C (Cst)   ASTM D – 445   16 ± 3   21 ± 5
  Density   ASTM D – 1298   0.90 ± 0.1   0.90 ± 0.1
  Flash Point° C   ASTM D – 97   250   250
  Pour Point °C   ASTM D – 92   - 5   - 5
  Viscosity Index   ASTM D - 2270   100   100

DISCLAIMER :
The information given here is considered to be correct and offered for your consideration, investigation and verification. No warranties are expressed or implied since the use of products is beyond our control .