CONNING OIL ADDITIVE EMULSIFIER - CL 114

DESCRIPTION:

‘Witcol CL - 114’ is a Specialty Emulsifier Package for the production of Conning Oil / DTY Oil. The Emulsifier Package is a combination of Non Ionic Emulsifiers, Antistats, and Antioxidants & Cohesive Agents.

The Conning Oil / DTY Oil prepared from ‘Witcol CL - 114’ exhibits Excellent Antistatic & Lubrication Characteristic & is suitable for Polyester / Nylon Filament Yarns for Texturising, Conning & Twisting Operations.

Advantages :

The Conning Oil prepared from ‘Witcol CL - 114’ exhibits the following important functions:
• Excellent Antistatic Properties.
• Excellent Yarn/Yarn & Metal / Yarn Lubrication.
• Low Frictional Properties.
• Excellent Scourability.
• Excellent Antisplash Characteristics.
• Excellent Stability of the product during storage of Lubricated Yarns.

METHOD OF PREPARATION:

Feed in Kettle 89% of Base Oil / White Oil wt/wt (Viscosity as desired for Final Product).Add 10% of ‘Witcol CL - 114’ wt. /wt. under stirring for 30 - 60 minutes, until they are dissolved and you get clear liquid.(Agitator speed 60 -70 rpm) Once you get clear liquid, add 1% wt. /wt. of TL - 30 and stir for another 15 - 30 minutes. (Agitator speed 60 - 70 r.p.m.)

NOTE:

Before using ‘Witcol CL - 114’, please ensure that it is a clear liquid. As the Pour Point is + 15 ºC during Winter, it may become hazy. If so, heat up to 40º C and stir well for 5 - 10 minutes, you will get clear liquid.

TECHNICAL SPECIFICATION :

  Properties   Values
  Appearance   Clear To Slight Hazy Liquid
  Colour   Light Yellow
  Viscosity @ 40° C (Cst)   75 ± 5
  Density @ 30° C   0.985 + 0.02
  Flash Point °C   Above 200
  10 % pH   7 - 8
  Acid Value mgms of KOH / gms   Max. 20.0

DISCLAIMER:
The information given here is considered to be correct and offered for your consideration, investigation and verification. No warranties are expressed or implied since the use of Product is beyond our control.