WITCOAT TWO PACK EPOXY PRIMER

DESCRIPTION:

Witcoat Two Pack Epoxy Primers is a two component modified polyamide cured epoxy primer with high resistance to impact and abrasion. It is also resistant to Spillage of Petrol, Mineral oil, Vegetable and Animal oils.

RECOMMENDED:

As a priming coat for protection of steel surfaces directly. It has excellent corrosion protection in both fresh and sea water. Strongly suggested as a prime coat for Chemical plants & also in Fertilizers, Petrochemical Complexes, Thermal Power Plants, Mines, Bridges, Dock installation, etc.

PHYSICAL PROPERTIES:

  PROPRIETIES   SPECIFICATION   NOTE
  Finish   Smooth & Glossy   
  Application Viscosity @ 30°c   11-15 Sec   By B-4 Ford Cup
  Shade   Black   
  Volume Solid %   20 %   
  Theoretical Spreading   8-10   M2/Ltr@ 35-45 Microns Dft
  Flash Point   Above 25 0C   Abel  Closed Cup
  Dry to touch   4-6 Minutes.   At 30°c
  Hard Dry   3-4 Hrs   At 30°c
  Fully Cured   1 Week   at 30°C
  Shelf Life   6 Months Months at 30°c

APPLICATION DETAILS:

  Mixing Ratio   :BASE: 3 parts by volume  
 :CURING AGENT 1 part by volume
  
  Pot Life   4-6 hours at 30°C
  Application Method   Airless spray Brush
  Thinner   Witcoat Epoxy Thinner   
  Flim Thickness   Dry: 35-45 micron (By Dft- Meter)  

APPLICATION CONDITIONS:
Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

SURFACE PREPARATION:
Remove oil grease with suitable detergent solution; and other contaminants by high pressure fresh water hosing. Dust off residue. .

SUBSEQUENT COAT: NONE REMARKS:
Maximum recoat interval refers to surface exposed to periodic immersion, heavy condensation chemical attacks and / or abrasion. Under other conditions no maximum interval is specified for Witcoat -Epoxy qualities. Before over coating in contaminated environments.

SAFETY: As a general rule, avoid inhalation of solvent vapour or paint mist and contact of liquid paint with skin and eyes. Provide forced with solvent borne coating in confine spaces or stagnant air. Also provide respiratory, skin & eyes protection. Also follow local and national safety regulations. DISCLAIMER: The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use No guarantee of results is implied since condition of use is beyond our control.