WITCOAT SINGLE PACK EPOXY PRIMER

DESCRIPTION:

Witcoat Single Pack Epoxy Primer is single component product. It is formulated on a specially designed epoxy resin. It is easy to use with no restrictive pot life. It has resistant to impact and abrasion. It is also resistant to Spillage of Petrol, Mineral oil, Vegetable and Animal oils.

RECOMMENDED:

As a priming coat for protection of steel surfaces directly. Strongly suggested as a for Chemical plants & also in Fertilizers, Petrochemical Complexes, Thermal Power Plants, Mines, Bridges, Dock installation, etc. It has excellent corrosion protection in fresh and sea water.

PHYSICAL PROPERTIES:

  PROPRIETIES   SPECIFICATION   NOTE
  Finish   Smooth & Semi Glossy to Glossy   
  Application Viscosity @ 30°C   25-35 sec   By B-4 Ford Cup
  Shade   According to the requirement of the party   
  Volume Solid %   40 %   
  Theoretical Spreading   8-11   M2/Ltr 35-45 Microns Dft
  Flash Point   Above 25 0C   Abel  Closed Cup
  Dry to touch   2-4 hrs.   at 30°c
  Hard Dry   16-18 hrs   at 30°c
  Fully Cured   7 days   at 30°C
  Shelf Life   6 Months   Months at 30°C

APPLICATION DETAILS:

  Application Method   Airless spray /spray Brush   
  Recommended Thinner   Witcoat Epoxy Thinner
  Indicated Film Thickness   Dry: 35-45 micron (By Dft- Meter)

SURFACE PREPARATION:
Remove oil grease with suitable detergent solution; and other contaminants by high pressure fresh water hosing. Dust off residue.

APPLICATION CONDITIONS:
Apply only on a dry and clean surface, with a temperature above the dew point to avoid condensation.

SUBSEQUENT COAT: NONE REMARKS:
Maximum recoat interval refers to surface exposed to periodic immersion, heavy condensation chemical attacks and or abrasion. Under other conditions no maximum interval is specified for Witcoat -Epoxy qualities. Before over coating in contaminated environments.

SAFETY:
As a general rule, avoid inhalation of solvent vapour or paint mist and contact of liquid paint with skin and eyes. Provide forced with solvent borne coating in confine spaces or stagnant air. Also provide respiratory, skin & eyes protection. Also follow local and national safety regulations.

DISCLAIMER:
The information contained within this data sheet is based on information believed to be reliable at the time of its preparation. The company will not be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained herein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use No guarantee of results is implied since condition of use is beyond our control.